News

Agellis sells advanced equipment to a well-known European steel plant

Agellis Group AB has received an order for the supply of a EMLI-TundishLevel system from one of the largest global steel producers for a plant in Europe. 

 

The EMLI-TundishLevel system is designed to monitor the true steel level in the tundish continuously during casting, ladle changes and draining in order to control the desired operating level without being affected by slag, wear or powder. The metal level in the tundish is measured electromagnetically to improve quality in the finished product, optimise production yield and increase safety at the caster.

 

The EMLI-TundishLevel system allows for both yield optimisation and process control, which is an important focus for any modern steel producer. Process knowledge plays a central part in achieving consistency and profitability in the competitive steel industry”, says Patrik Bloemer, CEO of Agellis Group.

 

Delivery and installation is expected to be made during the 1st quarter of 2018.

 

Read more

 

Agellis provides level measurements in the Middle East

Agellis Group AB has received an order for the supply of an EMLI-FurnaceProfile system. The order comes from a non-ferrous producer for a smelter plant in the Middle East.

 

The EMLI-FurnaceProfile system allows process improvement through objective and consistent metal level measurement and complete furnace material profiling. The system is used to measure metal levels in all type of furnaces with high accuracy and repeatability.

 

The non-ferrous industry is an expanding market for Agellis Group’s solutions where we can offer improved process control through level measurement objectivity, elimination of quality variations along with increased operator safety through automation”, says Patrik Bloemer, CEO of Agellis Group.

 

Delivery and installation is expected to be made during the 4th quarter of 2017.

 

Read more

 

Agellis EMLI-FurnaceProfile measures metal and slag levels in European smelter plant

Agellis Group AB has received an order for the supply of an EMLI-FurnaceProfile system. The order comes from an international non-ferrous producer for a smelter plant in Europe.

 

The EMLI-FurnaceProfile system allows process improvement through objective and consistent metal level measurement and complete smelter or furnace material profiling. The system is used to measure the different layers in the furnace, from which metal levels are calculated with high accuracy.

 

We are confident that this EMLI-FurnaceProfile installation will provide highly valuable information for the customer to increase process efficiency, cost savings, environmental impact and operator safety”, says Patrik Bloemer, CEO of Agellis Group.

 

Delivery and installation is expected to be made during the 3rd and 4th quarter of 2017.

 

Read more

Utvecklingsingenjör till AGELLIS Group AB

AGELLIS Group AB utvecklar och säljer kundanpassade mätinstrument till stålverk och smältverk världen över. Vi är idag 13 anställda och det går bra för oss, därför behöver vi förstärka med en teknisk och praktisk ingenjör som har ett brinnande intresse för lågfrekvent elektromagnetism.

 

Läs hela platsannonsen och ansök här: https://www.roirekrytering.se/annons-7647

 

För mer information om tjänsten, kontakta Patrik Bloemer på 046-101363 eller patrik.bloemer@agellis.com.

För mer information om rekryteringsprocessen, kontakta Leif Gustafsson på 0708-25 51 00 eller leif.gustafsson@roirekrytering.se.

 

Sista dagen att ansöka är 2017-09-12.

Servicetekniker till AGELLIS Group AB

AGELLIS Group AB utvecklar och säljer kundanpassade mätinstrument till stålverk och smältverk världen över. Vi är idag 13 personer och det går bra för oss, därför behöver vi förstärka med en servicetekniker som brinner för teknik och som vill ha världen som sin arbetsplats.

 

Läs hela platsannonsen och ansök här: https://www.roirekrytering.se/annons-7646

 

För mer information om tjänsten, kontakta Patrik Bloemer på 046-101363 eller patrik.bloemer@agellis.com.

För mer information om rekryteringsprocessen, kontakta Leif Gustafsson på 0708-25 51 00 eller leif.gustafsson@roirekrytering.se.

 

Sista dagen att ansöka är 2017-09-12.

Kallelse till årsstämma i Agellis Group AB (publ)

Aktieägarna i Agellis Group AB (publ) kallas härmed till årsstämma onsdagen den
21 juni 2017, kl. 15:00 på bolagets kontor på Tellusgatan 15 i Lund.

Kallelse Årsstämma 2017

Fullmaktsformulär 2017

Årsredovisning Agellis Group 2016

 

 

Agellis supplies Norwegian ferroalloy producer with VISIR-LadleSafe system

Agellis Group AB has received an order for the supply of a VISIR-LadleSafe system. The order, from a Norwegian ferroalloy producer, applies to a smelter plant in Scandinavia.

 

The LadleSafe system is designed to monitor ladles and alarm if the equipment shows external hot spots or ladle lining damage. The system minimizes the risk of ladle breakouts, improves safety for operating personnel and optimizes the utilization of the refractories in the ladle fleet.

 

Ladle breakouts are costly and can cause severe damage to equipment, personnel and the production chain. Avoiding breakouts is an important safety topic to address for any modern non-ferrous metal producer.

 

The ferroalloy and non-ferrous industry is a growing market for Agellis and we are very satisfied to see that our VISIR based products offers invaluable benefits for this part of the industry as well. In fact, any operation using ladles to transport liquid metal can minimize the risk for breakouts and tremendously increase safety by using Agellis’ LadleSafe solution”, says Patrik Bloemer, CEO of Agellis Group.

 

Delivery and installation is expected to be made during the second quarter of 2017.

 

Read More

Mjukvaruutvecklare till AGELLIS Group AB

Agellis Group letar nu efter en mjukvaruutvecklare.

 

Mer information: Mjukvaruutvecklare till Agellis (2017-04-19)

Information på LinkedIn

 

Agellis supplies a tundish level system to a plant in USA

Agellis Group AB has received an order for the supply of a Tundish Level Measurement system (EMLI-T) from an American steel plant belonging to a major South American group.

 

The Tundish Level Measurement system is designed to monitor the true metal level in the tundish continuously, during casting, ladle changes and draining in order to control the desired operating level without being affected by slag or powder. The metal level in the tundish is measured electromagnetically to improve quality in the finished product, optimize production yield and increase safety at the caster.

 

The EMLI-T system is unique and challenges traditional procedures in the industry. It is always a real pleasure when a customer decides to invest in the latest technology to remain competitive and market-leading. The fact that this customer belongs to a large group shows that investments such as this one can be approved when they increase production yield and bring a higher safety to the operation”, says Patrik Bloemer, CEO of Agellis Group.

 

Delivery and installation is expected to be made during the second quarter of 2017.

 

All Agellis electromagnetic products are based on a common electronic platform called EMLI.

 

Read More

 

Agellis minimizes steel losses in Japanese steel plant

Agellis Group AB has received an order for the supply of a LadleSlag monitoring system. The order comes from a major integrated steel plant in Japan.

The monitoring system LadleSlag is designed to help the operator monitor and rate the de-slagging process in order to achieve a sufficient and consistent slag removal, while simultaneously minimizing the steel losses.

In steel production, the focus lies in maximizing metal yield and reduce unnecessary process costs. Controlling the de-slagging process is crucial to production efficiency and significantly reduces the operator skill dependencies.

“Receiving an order from one of the leading Japanese steel producers is an honour and a great testament of the need for our products to achieve better process control in order to compete on a tough global market”, says Patrik Bloemer, CEO of Agellis Group.

Delivery and installation is expected to be made during the second quarter of 2017.

Agellis LadleSafe system uses a vison-based platform (VISIR) with a wide range of thermographic cameras together with unique user software and server solutions.

Read more

Agellis supplies leading global steel producer with LadleSafe monitoring system

Agellis Group AB has received an order for the supply of a LadleSafe system. The order, from a leading global steel producer, applies to a stainless steel plant in Europe.

 

The LadleSafe system is designed to monitor ladles and alarm if the equipment shows external hot spots or ladle lining damage. The system minimizes the risk of ladle breakouts, improves safety for operating personnel and optimizes the utilization of the refractories in the ladle fleet.

Ladle breakouts are costly and can cause severe damage to equipment, personnel and the production chain. Avoiding breakouts is an important safety topic to address for any modern steel producer.

With a rising market demand for stainless steel the pressure on production efficiency is increasing as well. This order, to a well-known stainless steel producer, is a great recognition of the value our solutions bring to our customers”, says Patrik Bloemer, CEO of Agellis Group.

 

Delivery and installation is expected to be made during the first quarter of 2017.

 

Agellis LadleSafe system uses a vison-based platform (VISIR) with a wide range of thermographic cameras together with unique user software and server solutions.

 

Read more

Agellis receives order to increase processing efficiency in a Scandinavian stainless steel plant

Agellis Group AB has received an order for the supply of a LadleSlag system. The order comes from Outokumpus Avesta works, a stainless steel plant in Sweden.

 

The order relates to the monitoring system called LadleSlag which is designed to monitor the ladle de-slagging process in order to achieve a sufficient and consistent slag removal and in the same time minimize steel losses.

“Being a producer of stainless steel one of our primary focuses is to maximize the metal yield throughout the processing, thus reducing operational costs. In addition, slag carry-over between treatments have grave implications on efficiency. Our strive is to minimize this while simultaneously reduce operator dependency by the installation of a LadleSlag system”, says Mikael Gottfridsson, Steel Plant Manager.

Receiving this order from one of the world’s predominant stainless steel producers is of great reference value to us and, even more important, an acknowledgement that our systems fills an important customer need“, says Patrik Bloemer, CEO of Agellis.

 

Delivery and installation is expected to be made during the 1st quarter of 2017.

 

Read More

(more…)

Recruiting International sales / Business developer

Agellis is looking for it’s new International Sales person / Business developer to be placed in our headquarters in Lund. Do you have experience from international B2B sales? Are you driven to do business in a challenging industry while always putting customers first? Do you have a strong interest and education within technology? Then you might just be our next International sales person!

More information to be found here: http://roirekrytering.se/annons?id=5128

Information on LinkedIn: https://www.linkedin.com/jobs/cap/view/210141782?pathWildcard=210141782&trk=job_capjs

For questions on the recruiting process please contact Jonna Warnerbring, jonna.warnerbring@roirekrytering.se.
For specific questions on the offered position please contact Johan Lindvall, 
johan.lindvall@agellis.com.

Last day to apply is November 30, 2016.

Agellis recieves order for an upgrade project in USA

Agellis has received an order from USA for the system upgrade of an american steel plant. The system to be upgraded is an older generation suspended sensor measurement solution for a precise steel meniscus measurement in the mold (EMLI-Ms). Using electromagnetic mold level measurement is a great advantage compared to other known methods since the measurement is very precise and completely independent of the powder thickness. Electromagnetic solutions allow controlling the steel meniscus level itself which is a process necessity to achieve level stability and produce quality products.

“It is always a great pleasure to receive orders for the upgrade of older systems since it is a true testimony of a long lasting customer satisfaction”, says Patrik Bloemer, CEO for Agellis.

Nasdaq First North has decided on the last trading day for Agellis Group AB

As previously announced, the Board of Agellis Group AB has applied for delisting from Nasdaq First North. Nasdaq First North has now granted the company’s request and decided that the last day of trading with Agellis shares is to be on April 29, 2016.

Agellis receives order for 140.000 EURO from a line builder

Agellis Group AB has received an order totaling 140.000 EUR for measuring systems to be installed in an European steel plant. The systems are mold level systems EMLI-Ms and are part of a revamping project that has been awarded to a line builder.

The project is due in the middle of 2016.

Agellis receives order for 1.500.000 SEK from an American plant

Agellis Group AB has received an order totaling 1.500.000 SEK for a measuring system from an American Copper producer.

The system will be used to increase quality and production output.

Agellis receives order for 200.000 EUR from an African smelter plant

Agellis Group AB has received an order totalling 200.000 EUR for a level measuring system from a smelter plant in Africa. The order relates to a level measuring system EMLI-S for a copper smelting furnace. The system with sensors is patented and measures the liquid metal level in real time in the furnace. The output from the system will give the customer more information about the melting progress in the furnace which will result in process optimization and a higher yield capability. The order consists of the measuring system, commissioning, spare parts and training.

The first delivery will be completed before the end of 2015 with the second delivery, including commissioning, occurring in the first half of 2016.

AGELLIS has been granted important technology patent in Chile

Agellis Group has been granted a patent for the technology used in the products EMLI-ELP and EMLI-FBL in Chile. Chile is an important market for the Agellis Groups’ Technology with many potential non-ferrous customers and the granting of this patent plays an important strategic role for Agellis.

This patent is an important part of Agellis patent strategy; to be unique in the area of level measurement of molten metal and slag. The patent gives Agellis protection from competition in both the steel industry (EMLI-FBL) and in the non-ferrous metals industry (EMLI-ELP).

Agellis receives order for 130.000 EUR from a Mexican steel plant

Agellis Group AB has received an order totalling 130.000 EUR for a slag detection system from a steel plant in Mexico. The order relates to a slag detection system for ladles, EMLI SIL, which detects the onset of slag in the tapping stream to help reduce slag carryover to the tundish when casting. The order is divided into two parts with a performance guarantee between the two deliveries. The first part of the delivery is the system and sensors for a limited number of ladles, while the second delivery will consist of all the sensors required to equip the rest of the ladles plus spare parts and system education.

During 2015, the first delivery will be completed with the second delivery including commissioning occurring in the first half of 2016.

Agellis receives order for 150.000 EUR from a European steel plant

Agellis Group AB has received an order totalling 150.000 EUR for the upgrade of three level measurement systems. The order comes from a steel plant in Europe. The order relates to the measurement systems called EMLI-Ms. The systems measure molten metal level in continuous casting moulds. The three new systems replace older versions which the steel plant has been using successfully for more than 20 years.

Delivery and installation is expected to be made during the fourth quarter of 2015.

Agellis receives an order for 50.000 EUR from a European copper plant

Agellis Group AB has received an order totalling 50.000 EUR for a measuring system to detect metal during slag tapping from a copper furnace. The order relates to the Agellis measurement system EMLI-SIO, a slag indication system for converters and non-ferrous furnaces.

In this installation the system will be used for detecting metal during slag tapping in a copper furnace. It is important that no metal is mixed with the slag as it is cooled with water in the next step of the process. If molten metal gets in contact with water there is a risk of explosions which can lead to plant personnel injuries, equipment damage and process interruptions.

Delivery and commissioning of the system will take place during the fourth quarter of 2015.

Agellis receives order for 140.000 EURO from a European steel plant

Agellis Group AB has received an order totalling 140.000 EUR for a measuring system, including a three year support agreement, from a steelworks in Europe. The order relates to the Agellis measurement system EMLI-SIE, a slag indication system for electric arc furnaces. The system helps the plant to tap steel from their electric arc furnace while preventing large amounts of slag entering the ladle. Reducing slag carryover from the electric arc furnace assists a more stable secondary processing of the steel and reduces consumption of additives.

Delivery of the system will take place during the third quarter and commissioning is scheduled for the fourth quarter of 2015. The support agreement will run for three years and includes the supply of sensors and a preventive maintenance program.

Agellis receives order for 150.000 EUR from a European copper plant

Agellis Group AB has received an order totalling 150.000 EUR for an upgrade of two level measuring systems. The order comes from a copper plant in Europe. The order relates to the measurement systems EMLI-T and EMLI-M. The systems measure metal level in a runner and respectively in a mould. The systems are installed in a continuous casting machine and are very important for the quality and yield of the product produced.

Delivery and installation is expected to be made during the fourth quarter of 2015.

Agellis has been granted an important technology patent in USA

Agellis Group has been granted a patent for the technology used in the products EMLI-ELP and EMLI-FBL in USA. USA is an important market for the Agellis Groups technology with many potential steel and non-ferrous customers and the granting of this patent plays an important strategic role for Agellis.

This patent is an important part of Agellis patent strategy; to be unique in the area of level measurement of molten metal and slag. The patent gives Agellis protection from competition in both the steel industry (EMLI-FBL) and in the non-ferrous metals industry (EMLI-ELP).

Agellis has been granted an important technology patent in Australia

Agellis Group has been granted a patent for the technology used in the products EMLI-ELP and EMLI-FBL in Australia. Australia is an important market for EMLI-ELP with many potential non-ferrous customers and the granting of a patent plays an important strategic role for Agellis.

This patent is an important part of Agellis patent strategy; to be unique in the area of level measurement of molten metal and slag. The patent gives Agellis protection from competition in both the steel industry (EMLI-FBL) and in the non-ferrous metals industry (EMLI-ELP).

Agellis receives order for 140.000 EUR from a European steel plant

Agellis Group AB has received an order totalling 140.000 EUR for a measuring system based on newly acquired infrared products. The order comes from a steel plant in Europe. The order relates to the measurement product LadleSafe, an infrared camera system that monitors ladles and gives an alarm if a ladle shows external hot spots or is close to breakthrough.

The system improves safety for personnel, while at the same time protecting plant infrastructure and preventing production stoppages in both steel and non-ferrous plants. It can also help improve ladle fleet utilization. The system is leased to the client over a three-year period with an option for a subsequent buyout or continued leasing. Delivery is expected to be made during the second quarter and handed over to the customer during the third quarter of 2015.

Agellis has been granted an important technology patent in Chile

Agellis Group has been granted a patent for the extended use of our EMLI furnace technology in the Republic of Chile. Chile is an especially important market with many potential non-ferrous customers and the granting of a patent plays an important strategic role for Agellis. This patent is an important part of Agellis patent strategy; to be unique in the area of detection and level measurement of molten metal and slag. The patent gives Agellis protection from competition in both the steel industry and in the non-ferrous metals industry when measuring in various furnace types.

Agellis in advanced negotiations with a strategic cooperation partner

AGELLIS Group is in advanced negotiations with a strategic partner that has expressed an interest to invest and become a shareholder in Agellis to obtain an ownership stake of at least 10 per cent.

Read more

AGELLIS has been granted important technology patent in South Africa.

Agellis Group has been granted a patent for the technology used in the products EMLI-ELP and EMLI-FBL in the republic of South Africa. South Africa is an especially important market for EMLI-ELP with many potential non-ferrous customers and the granting of a patent plays an important strategic role for Agellis.

Read more

Agellis receives order from a North American steel plant

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received an order totalling 140 KEuro for a measurement system at a steel plant in North America.

The order relates to a system (EMLI-T) that will accurately measure the steel level in tundishes at a continuous casting machine. The order was preceded by a demonstration of the Agellis equipment at the plant while working together with the development department of the steel group. The system is expected to be delivered during the third quarter and handed over to the customer during the fourth quarter of 2014.

Agellis had close cooperation with the steel group development department and we could show the plant significant operational benefits and an attractive payback time. The installation will have a great reference value for Agellis globally” says Patrik Bloemer, CEO of Agellis.

For competitive reasons, Agellis chooses not to mention the end user plant by name.

All Agellis products are based on a common electronic platform called EMLI. EMLI T (Tundish) measures the steel level in a tundish with high accuracy, independent of slag and powder thickness. A reliable measurement of the steel level in the tundish helps the plant to increase production and obtain a higher yield.

Read more

Agellis gets funds to develop a new generation sensors

AGELLIS Group AB has through the strategic inovation program for process IT and automation (PiiA) (strategiska innovationsprogrammet Processindustriell IT och Automation (PiiA)) recieved a partial finance for executing a pre-study of the next generation level measurement sensors to be used in molds. The aim is to understand how to widen the market for electromagnetic level measurement.

Read more

Agellis receives first Scandinavian order for unique furnace measurement system

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received an order totaling 660 KSEK for a new measurement system to be installed at Ovako Hofors Sweden.

Read more

Agellis receives order for 75 KEuro from a North American steel plant

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received an order totaling 75 KEuro for a measurement system at a steel plant in North America.

Read more

Agellis receives order for 380 KEuro from a European copper plant

AGELLIS Group, which develops and sells products and solutions to the globalmetals industry, has received an order totaling 380 KEuro for a measurementsystem at a copper smelting plant in Europe.

Read more

Agellis gets order worth 3,3 MSEK from a European copper producer

Agellis Group AB, engineers, manufactures and sells product and solutions for the metals industry world wide has recieved an order totaling 3,3 MSEK from a European copper smelter.

Read more

Agellis receives an order for 110 KEuro from SMS Concast

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received an order totaling 110 KEuro for measurement systems from SMS Concast, Switzerland.

Read more

Agellis receives an order for 120 KEuro from a South American steelplant

AGELLIS group which develops and sells products and solutions to the global metals industry, has received an order totaling 120 KEuro for a measurement system from a South American steel plant.

Read more

Agellis receives an order for 177 KEuro from a South African steel plant

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received one order totaling 177 KEuro for measurement systems from a South African steel plant.

Read more

Agellis receives an order for more than 2.1 MSEK for delivery to a Argentinean steel plant

AGELLIS Group, which sells level measurement and slag indication systems to theglobal metals producers, has received an order worth more than 2.1 million SEK for two instruments to be supplied to an Argentinean steelworks.

Read more

Agellis receives upgrade order for 0.8 MSEK

Agellis Group, which develops and sells systems and solutions for the global metals industry, has received an upgrade order totalling 0.8 MSEK for a measuring instrument to a smelter plant in Europe.

Read more

Berthold and Agellis start co-operation with initial development order placed on Agellis

BERTHOLD TECHNOLOGIES GmbH & Co. KG, a global supplier of measurement equipment for the metals industry and AGELLIS Group AB, a company that develops and markets products/solutions to the global metals industry, have signed a co-operation agreement for the development and delivery of electromagnetic equipment for level measurement in continuous casting molds. An initial order for adaptation of the EMLI technology into a unique Berthold product platform has been raised.

Read more

Agellis receives an order for 70 KEuro from a North American steel plant

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received one order totaling 70 KEuro for measurement systems from a North American steel plant.

Read more

Agellis receives an order for more than 0.5 MSEK for delivery to a American steel plant

AGELLIS Group, which sells level measurement and slag indication systems to global metals producers, has received an order worth more than 0.5 million SEK for an instrument to be supplied to an American steelworks.

Read more

Agellis recieves an order worth 0,6 MSEK from an american steel plant

AGELLIS Group, receives order worth 0,6 MSEK for measurement equipment from an American steel plant.

Read more

Agellis receives an order for 1.3 million SEK from a smelter plant in Norway

AGELLIS Group, which develops and markets products for the global metals industry, has received an order of 1.3 million SEK to supply a measuring instrument to a smelter plant in Norway.

Read more

Agellis receives follow-up order for 1.8 MSEK

AGELLIS Group AB, which develops and sells products and solutions to the global metals industry, has received a follow-up order totaling 1.8 million SEK for a measuring instrument to a smelter plant in Europe.

Read more

Agellis receives an order for 2.8 million SEK from a smelter plant in Norway

AGELLIS Group, which develops and markets products for the global metals industry, has received an order totaling 2.8 million SEK for a measuring instrument to a smelter plant in Norway.

Read more

Agellis receives an order for 250 TEuro from SMS Concast

AGELLIS Group, which develops and sells products and solutions to the global metals industry, has received two orders totaling 250 TEuro for measurement systems from SMS Concast, Switzerland.

Read more

Agellis receives an order for 1 MSEK from South Korea

The AGELLIS Group, the company that develops measurement instruments and solutions for the global metals industry, has received an order for a system with a value of 1 MSEK for delivery to a steel plant in South Korea.

Read more

Agellis receives an order for more than 1 MSEK for delivery to a Mexican steel plant

The AGELLIS Group who develop systems and solutions for the global metals industry has received an order for an upgrade of a measurement instrument with a value of more than 1 MSEK for delivery to a Mexican steel plant.

Read more

Agellis receive an order from a South African smelting company for 3 MSEK

The AGELLIS Group who develop systems and solutions for the global metals industry has received an order for 3,0 MSEK for a measurement instrument from a South African platinum smelting company.

Read more

Agellis receives an order for 1,0 MSEK from the US

The AGELLIS Group who develop systems and solutions for the global metals industry has received an order for 1,0 MSEK for measurement instruments from an American plant.

Read more

AGELLIS Group receives order from India

AGELLIS Group AB (publ), has received an instrumentation order for a furnace level measurement system from one of the premier steel producers in India. The order has a value of approximately 180.000 Euro. This is an important reference order for Agellis in the expanding Indian steel market.

Read more

New instrument order for AGELLIS Group

AGELLIS Group AB (publ), has received an instrumentation order from a leading European steel plant for the supply of a unique tundish level measurement system. The order has a value of approximately 140.000 Euro.

Read more

Agellis receives order for unique measurement system from European customer

AGELLIS Group AB (publ) has received an order from a European customer, for an EMLI-T, an instrument that measures true steel level in tundishes. EMLI-T is based on the new EMLI-3 product platform recently developed by Agellis. The order value is 0.7 MSEK.

Read more

Agellis presents new product and receives order from leading European copper plant

AGELLIS Group AB has received an order from a leading European copper plant for the EMLI-S, a new system for metal level measurement in smelters. EMLI-S is the first system based on the new EMLI 3 product platform recently developed by Agellis. The order value is for more than 1 MSEK.

Read more

Agellis receives follow-up order worth 3,5 MSEK from Larco

Larco has one instrument installed already and is now equipping the remaining four furnaces with instruments from Agellis.

Read more

AGELLIS Group buys Metal Process Control

Agellis Group AB that develops, produces and sells advanced technology forprocess control in the metal industries has bought all shares in MPC, MetalProcess Control AB located in Nyköping, Sweden.

Read more

AGELLIS receives order of Level Measurement System from partner in the US

Agellis Group AB, a company that develops and markets advanced technology for process control in the steel industry, has received an order valued to 800.000 SEK from it’s American partner Metal Products and Engineering-U.S , LLC (MPE-US).

Read More